[XF] 簡測 ASUS P5Q3 Deluxe X Kingston DDR3
這邊小弟如果沒有記錯的話，這是 ASUS 帶來目前 P45 有支援 DDR3 RAM 的 motherboard加上P5Q系列CPU增到了16相供電，而這片RAM和NB的部分也有3相的電源供應，光是聽起來就非常火力十足
小弟榮幸在日前也拿到了一片，趕緊的就是上機做簡測
測試平台
CPU：INTEL E8400 [+TR U120-EX]
MOBO：ASUS P5Q3 Deluxe0302 BIOS
RAM：Kingston DDR3-1800
VGA：LEADTEK 9600GT EX
HDD：SEAGATE 7200.9 160GB
POWER：PC P&C 750W
8*450 / DDR3-1800 7-7-7-15 2T
8*500 / DDR3-2000 7-7-7-15 2T
目前hyde是使用0302的BIOS
超頻部分，我電壓手動，幾乎都是上預設值，就算要逼的時候，頂多加到NB到1.58
1:2，FSB 500、DDR3-2000後，在往上超是有點棘手，期待有新的BIOS能改善
目前還在繼續玩，隨後有新的測試會立即補上
我期待的版子終於出現嚕
真想來給他玩一下 原帖由 shine121 於 2008-5-29 17:36 發表 https://www.xfastest.com/images/common/back.gif
我期待的版子終於出現嚕
真想來給他玩一下
你也在等這張ddr3的板嗎??
:(.... 剛回到家！補圖先！
主板全覽照
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1840.JPG
CPU 16相供電
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1844.JPG
RAM 3相
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1850.JPG
NB 3相
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1846.JPG
採用跟ROG一樣的按鈕POWER RESET
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1848.JPG
SATA IDE 接頭
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1849.JPG
後方
https://pic.xfastest.com/hyde211/share/P5Q3D/XF/IMG_1853.JPG 原帖由 hyde211 於 2008-5-29 18:23 發表 https://www.xfastest.com/images/common/back.gif
你也在等這張ddr3的板嗎??
:(....
是鴨 老實說還有M2E :loveliness:.. 原帖由 shine121 於 2008-5-30 05:05 發表 https://www.xfastest.com/images/common/back.gif
是鴨 老實說還有M2E :loveliness:..
我覺得可以期待M2F，這應該是屌板一張
;P.. 请问大大关于这主版超频的问题，我在bios里设了400外频，可以正常进系统，谁知道重起一下机器就黑屏了，要跳线清bios恢复原始设置才能启动。好像记得以前用AsusSE的时候超失败了会自动恢复bios，怎么这会那么诡异。难道bios里设置有问题
下面是我尝试设的400外频
JumperFree Configuration Settings
AI Overclock tuner: Manual
CPU Ratio Setting: 6
FSB Strap to North Bridge: auto
FSB Frequency: 400
PCI-E Frequency: 100
DRAM Frequency: 1600
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual
1st Information :
CAS# Latency: 7
DRAM RAS# to CAS# Delay: 6
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 20
RAS# to RAS# Delay : A
Row Refresh Cycle Time: A
Write Recovery Time:A
Read to Precharge Time: A
2nd Information :
READ to WRITE Delay (S/D): A
Write to Read Delay (S): A
WRITE to READ Delay (D): A
READ to READ Delay (S): A
READ to READ Delay (D): A
WRITE to WRITE Delay (S): A
WRITE to WRITE Delay (D): A
3rd Information :
WRITE to PRE Delay: A
READ to PRE Delay: A
PRE to PRE Delay: A
ALL PRE to ACT Delay: A
ALL PRE to REF Delay: A
DRAM Static Read Control: D
DRAM Read Training: D
MEM. OC Charger: E
AI Clock Twister: A
AI Transaction Booster: A
Common Performance Level :
Pull-In of CHA PH1: DISABLED
Pull-In of CHA PH2: DISABLED
Pull-In of CHA PH3: DISABLED
Pull-In of CHA PH4: DISABLED
Pull-In of CHB PH1: DISABLED
Pull-In of CHB PH2: DISABLED
Pull-In of CHB PH3: DISABLED
Pull-In of CHB PH4: DISABLED
CPU Voltage: 1.325
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.52V
FSB Termination Voltage: 1.22V
DRAM Voltage: 1.92V
NB Voltage: 1.40v
NB GTL Reference: AUTO
SBridge Voltage: 1.10V
PCIE SATA Voltage: 1.50V
Load Line Calibration: enable
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : 300ps
NB Clock Skew : 100ps
Advance CPU Settings
CPU Ratio Setting: Manual
CPU VID: Default
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel? Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled 超不上去，再好的板子又有什麼用呢？
聽說P5Q的板子不好超好像是真的。
又賣那麼貴。 原帖由 ddr0917 於 2008-6-18 04:09 發表 https://www.xfastest.com/images/common/back.gif
请问大大关于这主版超频的问题，我在bios里设了400外频，可以正常进系统，谁知道重起一下机器就黑屏了，要跳线清bios恢复原始设置才能启动。好像记得以前用AsusSE的时候超失败了会自动恢复bios，怎么这会那么诡异。难道bios里 ...
請問一下BIOS你是用幾板的
最新的是0702 原帖由 hyde211 於 2008-6-18 12:09 發表 https://www.xfastest.com/images/common/back.gif
請問一下BIOS你是用幾板的
最新的是0702
0704了.
頁:
[1]
2