CaseLabs TH10 with Pedestal and extended tops

Main Guts
CPU: Intel Core i7-3960X
Motherboard: Asrock Extreme 11
GPU: 2x EVGA GTX 690s
Memory: 64 gb, Corsair Dominator GT 1866
PSU: 2x Corsair AX850. Probably could get by on one big PSU, but this setup will allow me some additional overhead, and as an added benefit, it should keep the PSU fans spinning at a minimum
Raid Controller: ARECA ARC 1882IX16 PCI-e 3.0.
OS Drive: 2x 256 gb SSD Vertex 4 in Raid 0
Raid 5 Array (for storage): 10x 512 gb SSD Vertex 4
Raid 0 Array (scratch drives, render drive): 4x 256 gb SSD Vertex 4 Series
Cooling
Radiators: 4x Hardware Labs Black Ice SR-1 480 Radiators
Radiators: 1x Hardware Labs Black Ice SR-1 280 Radiators
More Radiators: 2x AquaComputer AMS 360 Copper Fins
Pumps: 4x D5 variant (Swiftech MCP655’s)
Pump Top: Bitspower Dual D5 Pumptop
Pump Top: 2x Bitspower Pumptop V2
Pump Decoration: 4x Bitspower D5 Modkit
Reservoir: Some Custom Work from FrozenQ
Radiator Fans: 47x Noiseblocker M12-S2's
Case Fans: 4x Noiseblocker 40mm Black Silent
Case Fans: 4x Noiseblocker 140mm Black Silent
CPU Waterblock: Mips Iceforce Custom Copper Plated
GPU Waterblocks: 2x AquaCompuer Aquagrafx 690's
Motherboard Waterblocks: Both the Mips AE11 block and the Nateman_doo custom AE11 block. Will test both and winner stays!
RAM Waterblocks: 2x Mips 4 Dimm Block
TIM: Indigo Extreme. Kind of scared to try the “reflow”, but it will be an adventure
Tubing: I'll be using a combination of white, clear and custom dyed crimson.
Fittings: Bitspower White!

這次分享的水冷設備
冷頭銅底沒有加以電鍍
以裸底呈現

冷排也是一樣的
水箱一個選擇掛置冷排上一個掛在機殼
也不占空間剛好可利用

水泵採用D5二顆

整體完成圖如上
整體看起來也不會太亂
配色上也不錯
這台機殼還滿大的
所以設備再增加也滿有空間的
改裝更多圖片過程可參考:
https://www.overclock.net/t/12662 ... er-box-aka-the-bbbb