[XF] ASUS Striker 2 Formula ( 780i SLI ) R.O.G

SLI 又回來了嗎？ 在 INTEL 的P965後，可以看見INTEL的晶片組上支援CROSSFIRE
加上火紅又好超的INTEL晶片組，NVIDIA的SLI慢慢的消失
今年NVIDIDA推出TRIPLE SLI 支援 3路顯卡技術，而ASUS的STRIKER 2 FORMULA
就是採用NVIDIA新推出的 780I SLI 晶片組
集成北橋 780I SLI 南橋 570 SLI 加上NF200-SLI 集成3個PCI express 16X
華碩採用自行layout版本，並支援 intel 45奈米處理器，要上3路SLI 必需要有8800GTX或8800ULTRA
有二個SLI橋接器的才行。
華碩的ROG有幾個特別的技術，除了採用良好的散熱模組，音效卡是獨立的SUPREMEFX2
PCB上有電壓指示燈，BIOS可以調教CPU LEVEL UP，幫你自動超頻升級。

高階玩家用品就不用自動超頻了吧@@

餅乾兄！3張8800gts給他衝下去吧
:)...

期待進階實測

期待餅乾大的測試,價位不知道再那個地方

原帖由 hyde211 於 2008-1-17 07:03 PM 發表
餅乾兄！3張8800gts給他衝下去吧
:)...

期待進階實測

只有8800GTX跟8800Ultra才能跑triple SLI , 全世界大概沒幾個會花錢來跑triple sli , 那些跑記錄的人都是送的 , 因為我也收到3張ultra

原來是這樣

NV真奸詐

這樣真的沒有機個人會花錢跑

BIOS

from the latest bios and striker 2 formula
as u can see it has ultimate voltages


what about 680i to 780i?
i get better HT on 780i, HT is running 280mhz, LDT is 6
on 680i, u could run 280 to 320mhz, when LDT is 5
so , 280mhz *6 = 1680mhz HT freq, otherwise on 680i 320mhz*5=1600mhz HT





for the memory perfomance, added Trd ,then u can choose what strap for using.


Asus's striker II formula is non reference desgin from nvidia
but it also supports nvidia's Nforce system, u can watching the hardware monitor it bulit with 3d





for that u can download on nvidia's website and search nforce system software

keep go some 2d testings
with my 9650, fsb is around 445mhz stable




have not adjust TRD in bios, just leave it auto
then i tweak some times via memset 3.5beta
after right TRD i think the performance will be better.

the memory bandwidth is nice for ddr2.




for memset 3.5 beta , please download here
https://www.xfastest.com/viewthre ... &extra=page%3D1

ASUS powerfully works on vcore
when the loadline calibration is enable in bios
Striker 2 formula  usefully aviods the vdrooping

striker 2 formula ,when Loadline calibration is "disable"
bios set 1.45v , after vdrop is 1.344v idle in vista64
and drooping to 1.29v when 9650 is load 100%

BIOS set 1.45v, idle is 1.344v (loadline disable)


100% load 1.29v



Loadline Calibration is Enable
BIOS set 1.45v , idle is 1.36v after bios vdrop.
3

load is same 1.36v, ASUS is fully control the vdrooping.